Vector2 V400, Руководство по установке

Страница: 22 / 52

Alternative positions
A and B ‘min value’
Gate swing A+B should Up to Up to Up to Up to Up to Up to
angle not exceed 1.5m 2m 2.5m 3m 3.5m 4m
60° - 90° or less 460mm
100° 400mm
110° 340mm
120° 285mm
Recommended positions
(Only for a 2.5m gate or shorter)
A value B value
90° or less 205 250
100° 165 215
110° 144 180
120° 115 150
Alternative positions
Gate swing A+B should Up to Up to Up to Up to Up to Up to
angle not exceed 1.5m 2m 2.5m 3m 3.5m 4m
60° - 90° or less 380mm
100° 310mm
110° 265mm
120° 220mm
A and B ‘min value’
Recommended positions
(Only for a 2.5m gate or shorter)
A value B value
90° or less 160 200
100° 120 180
110° 120 130
120° 110 110
120°
100°
110°
90° 80°
70°
60°
Gate opening angle
0°
120°
100°
110°
90° 80°
70°
60°
Gate opening angle
0°
1400mm Extended 1400mm Extended
1000mm Retracted 1000mm Retracted
1600mm Extended 1600mm Extended
1100mm Retracted 1100mm Retracted
For V400 (400mm operator)
For V500 (500mm operator)
110mm 110mm 110mm 120mm 140mm 160mm
110mm 110mm 110mm 120mm 140mm 160mm
110mm 110mm 110mm 120mm
110mm 110mm 110mm
NOTE: A and B must both be greater than ‘min value’ and A + B < (A+B ) max; where
B = (A+B) Max - A min OR; A = (A+B) Max - B min
NOTE: A and B must both be greater than ‘min value’ and A + B < (A+B ) max; where
B = (A+B) Max - A min OR; A = (A+B) Max - B min
Page 23
Gate swing
angle
Gate swing
angle
Figure 7 Position Inward Opening Gates
Page 22
B
A
Inward Swing Gate Setup
For gates opening 90° or less:
For gates opening more than 90°:
Dimension A is always measured
at right angles to the centre-line of
the gate in its open position.
Ensure that the gate does not exceed the
gate mass specifications on page 8.
For best security (but slower operation)
install with large B value
For fast operation (but less security)
install with small A and small B values
G
A
T
E
O
P
E
N
G
A
T
E
O
P
E
N
G A T E C L O S E D
Operator Installation Operator Installation
A
B
CAUTION:
NOT RECOMMENDED
‘(A+B) max’
‘(A+B) max’
110mm 110mm 110mm 120mm 140mm 160mm
110mm 110mm 110mm 120mm 140mm 160mm
110mm 110mm 110mm 120mm
110mm 110mm 110mm
NOT RECOMMENDED