TCI-W13, TCI-W23 Universal Controller
O
VERVIEW
Doc: 70-00-0365, V1.0, 20200304
© Vector Controls GmbH, Switzerland
Page 1
Subject to alteration
TCI-W13, TCI-W23 Series wall mounted universal controller
Features
•
Universal PI and/or binary control for any analog
input/output signal and range
•
Multiple auxiliary functions: heat-cool auto changeover,
automatic enable, set point compensation
•
Differential, averaging, min and max functions
•
Cascading of control loops (-W23 type)
•
Alarm monitoring of low and high limits on all inputs
•
Programmable reaction in case of alarm
•
Feedback function for inputs and set points
•
Functions for dehumidifying, set point shift, cascade control
•
Password protected programmable user and control
parameters
TCI-W23 also includes
•
Power cap protected real-time clock with 48 hr power backup
•
7-day programmable schedules, with options including
change of set points and direct position of manual outputs
•
Blue backlight
Applications
•
Fan coil units
•
Heat exchangers
•
Zoning
•
VAV
•
Air handlers
•
Fan, pump control
•
Humidifiers
•
Dehumidifiers
•
Ventilation
•
Radiant heating
•
Radiant cooling
•
Pressurization
General
•
TCI-W13: 1 independent control loop, 1 internal temperature sensor, 1 universal input (analog/binary/temp),
1 binary output, 2 analog outputs
•
TCI-W23: 2 independent control loops, 1 internal temperature sensor, 1 universal input, 1 passive input,
1 binary output, 2 analog outputs.
•
Internal temperature sensor standard. Add replaceable humidity element as required or order -H version:
AES3-HT-A2 (2%), AES3-HT-A3 (3%) or AES3-HT-A5 (5%)
•
Flexible application configuration is made with a parameter-setting routine using the standard operation terminal
Name
Ordering
Model
Item code
Loop
Temperature
input
Humidity
input
UI TI
Binary
output
Analog
output
Option
TCI-W13
40-10 0170
1
1
0
1
0
1
2
Standard
TCI-W13-H
40-10 0171
1
RH sensor 3% acc.
TCI-W23
40-10 0172
2
0
1
1
7-day programmable
TCI-W23-H
40-10 0173
1
RH sensor 3% acc.
AES3-HT-A2
40-50 0102
1
RH sensor 2% acc.
AES3-HT-A3
40-50 0103
1
RH sensor 3% acc.
AES3-HT-A5
40-50 0104
1
RH sensor 5% acc.
Temperature sensors
: Use Vector Controls NTC sensors to achieve maximum accuracy: SDB-Tn10-20 (duct), SRA-Tn10
(room), SDB-Tn10-20 + AMI-S10 as immersion sensor.
Actuators
: Choose modulating actuators with an input signal type of 0
…
10 V DC or 4
…
20 mA (min. and max. signal
limitations may be set with parameters. 3-point point actuators with constant running time are recommended).
Binary auxiliary device
s (e.g. pumps, fans, on/off valves, humidifiers, etc.): Do not directly connect devices that
exceed specified limits in technical specifications
–
observe startup current on inductive loads.
Housing
Blank = square housing
In/Outputs:
See table below
Control loops: 1 = 1 control loop, 2 = 2 control loops
Mounting:
W = Wall mounted
Series:
TCI
T C I
2
- W
U
-
3
