LVP615D series user manual
Chapter 7: Remote control instructions
43
7.1.2 Wired network
LVP615D built-in network convert RS232 module, after wired network connecting LAN and setting
relative network configuration parameters (refer user manual page 38 “6. Communication ”),
LVP615D has been a work station in the local area network. So another terminal device in the local
area network can control the LVP615D through software. As the picture below, through software,
anyone of terminal (work station) in the local area network can control the LVP615D in the local area
network by remote method.
router
Work station2
Network cable
Work station1
LVP615D
Wi-Fi
Network cable
7.1.3 Wi-Fi connection
LVP615D is built in Wi-Fi module. Through this module, user can achieve Wi-Fi remote control of
LVP615D. The module supports 2 WIFI connection methods:
First., Wireless Router, another wireless device connects the module directly and control.
Second, Through Wi-Fi connect wireless Router and become a work station in the local area
network, so another terminal device in the local area network through software to control LVP615D
by remote method, the control method is similar through LAN port connecting.
Here are relative setup and instruction about LVP615D Wi-Fi module and how to realize the 2
control methods.
NOTICE: When using WIFI connection, WIFI ANTENNA must be installed.
