LVP615D series user manual
Chapter 7: Remote control instructions
64
(5) Parameters configuration of other processors.
Connect other processors to be set in turn using RS232 cable, select device ID, select
No. of corresponding LED following above step 4), the system automatically
calculates the parameters of the processor, then select Mosaic mode. Complete
parameters configurations of other processors in this way.
Output resolution setting
At the main interface of LVP615D control software
，
Click
Resolution
And then the above
interface will appear.In this interface
，
the user can set the output resolution.
Setting output resolution:
click downward triangle to select a proper output resolution,
processor will apply the resolution selected automatically. If select custom resolution, you
need to set the width, height and frame, after configuring click
OK
to apply the resolution.
