Vdwall LVP615D, Руководство пользователя

Страница: 14 / 85

LVP615D series user manual
Chapter 5: Basic user instructions
Chapter 5: Basic user instructions
After LVP615D boot, it enters the operation status of last shut-down including signal switching status, PIP/POP
(or Text overlay) status and mosaic status. Among them, PIP/PBP( or text overlay) status and mosaic status can
only realize relative functions and cannot do other operation. Other relative operations are available under signal
switching status. We illustrate the common operations as below.
5.1 Input signals selection
LVP615D supports two signal switching methods including“ One key switching ”and“ Pre.+Take switching ”.
The switching method can be set in user setup menu “2.6 switch mode”. “ One key switch ” is default
method. One key switch to new input signal through input signal selection buttons.
；
“ Pre.+Take switch ” only
available for seamless switching. Press input buttons to preselect first. Then press Take button to switch
from current input signal to preselected signal.
Input signal selection as follows
：
Buttons Description
1x Composite video signal input (PAL/ NTSC)
1x Composite video (PAL/ NTSC) or analog component video input
2x PC analog signal input
1x DVI digital signal input
1x HDMI digital signal input
1x DisplayPort digital signal input
*
1x extended signal input
Note
：
(1) YPbPr and V2 share the same port. If need,configure the port to YPbPr in setup menu.