LVP615D series user manual
Chapter 6: Setup menu instructions
Operation is as below:
When the input signal of LVP615D is DVI format and the splicing mode is open (Mosaic indicator lit up),
press Setup, LVP615D enters splicing menu. Press ↓button to select setup option needed to adjust,
rotate
knob
to change parameter, press OK button to save.
Operation is as below :
In the menus E.1~E.2, input parameters of whole splicing screen;
In the menus E.3~E.4,input the size and location (relative to whole splicing screen) of LED screen the
LVP615D drives;
In the menu E.7 sync. Mosaic menu, select to turn the function on or off;
In the menu E.8 auto Calculation, press OK, LVP615D starts to mosaic automatically;
Observing image splicing effect. If any problem, enter fine adjustment menu option E.9~E.16 to adjust
image.
Below is a 2×2 mosaic example using 4 sets of LVP615D, telling us how to use multi-units cascade of
LVP615D and what we should pay attention to.
The definition of the LED screen is 3456×1920, we can divide it into the four small pieces of LED of
1728×960 pixels as shown in figure below, each piece of small LED screen is driven by a unit of
LVP615D. With total 4 sets of LVP615D, the 3456×1920 pixels LED screen is able to display a full
picture.
#1
（
1728×960
）
#2
（
1728×960
）
#3
（
1728×960
）
#4
（
1728×960
）
