LVP615D series user manual
Chapter 6: Setup menu instructions
6.2.1 DVI EDID
LVP615D supports custom DVI EDID. In concert with “
custom output format
”
，
LVP615D can
realize DVI input image and output image pixel to pixel display. LVP615D supports 16 fixed DVI
EDID and custom EDID. Normally the parameters setting should be consistent with“
custom output
format
”
（
refer to page28 ).
Operation steps
：
In the menu 2.1 DVI EDID
，
rotate
knob
to select suitable resolution and press
OK
to save data. After save data, need press
OK
to enter“2.1 custom DVI EDID” menu to set
2.1.1custom width
、
2.1.2custom height and 2.1.3 custom V frequency and press
↓
to enter APPLY
and press “
OK
” to make parameters effective.
2.1 custom DVI EDID
--------------------------------------
2.1.1 Cus. width
1920
2.1.2 Cus. height
1002
2.1.3 Cus. V Freq.
60
2.1.4 Apply
OK to apply
6.2.2 Hot spare setting
LVP615D
supports hot spare of input signals. When the current input signal is lost. LVP615D will
switch to the spare signal automatically to avoid image interruption caused by the fault of signal
source.
2.Input video signal
--------------------------------------
2.1 DVI EDID
1280x1024_60
2.2 V1/V2 backup
off
2.3 VGA1/VGA2 backup
off
2.4 HDMI/DVI backup
off
2.5 V2 or YPbPr
V2
2.6 switch mode
one key switch
