VDL Futura FHD2 E6 страница 98 Скачать руководство пользователя

Страница: 98 / 184

Futura FHD2/FMD2 E6

DIAGNOSIS

Components

3 - 4

DD1020_01

3.2.4

CYLINDER HEAD GASKET

The cylinder head gasket is damaged

The coolant temperature is too high

Possible cause

Remedy

The head gaskets have not been fitted correctly and
have started to leak.

Check the cylinder heads and the cylinder block.

The cylinder heads were not tightened according to the
specified tightening procedure.

Check the cylinder heads and the cylinder block for dam-
age and fit the cylinder heads.

One of more threaded holes for the cylinder head bolts
are cracked or damaged.

Check the cylinder block.

The height of the cylinder lining above the cylinder block
is incorrect.

Check the height of the cylinder lining.

The cylinder head is cracked.

Check the cylinder heads.

The surfaces of the cylinder head and the cylinder block
have been knocked.

Check the surfaces of the cylinder heads and the cylin-
der block.

One or more cylinder head bolts of the wrong type or the
wrong dimensions have been used.

Use the specified bolts.

The coolant temperature is too high

See “The coolant temperature is too high, cooling
system”

The coolant temperature is too high (



3 - 4)

Possible cause

Remedy

Faulty intake system.

Check the intake system.

Incorrect poly V-belt tension.

Check the poly V-belt tension. If necessary, replace the
poly V-belt or the poly V-belt tensioner.

The coolant level is too low.

Check the coolant level. If necessary, top it up.

A coolant hose is cracked or blocked.

Check/clean the coolant hoses.

The cooling system’s intercooler and radiator are con-
taminated.

Check/clean the cooling system’s intercooler and radia-
tor.

The waste-gate setting too high.

Check the waste-gate setting.

The turbo compressor housing’s air hose to the waste-
gate diaphragm leaks or is not connected.

Check the air hose. If necessary, replace it.

The pressure cap is faulty or does not work.

Check the pressure cap.

The thermostat opens insufficiently or does not open.

Check the thermostat and its operation.

The coolant filter is contaminated.

Check the coolant filter. If necessary, replace the filter
and clean the cooling system.

The wrong type of thermostat is fitted.

Check the thermostat and its operation.

The coolant pump is faulty.

Check the coolant pump’s shaft, bearings and fan. If nec-
essary, replace the coolant pump.

The fan drive is faulty.

Check the fan drive’s operation.

Содержание Futura FHD2 E6

























































































































































































Результаты поиска

Содержание Futura FHD2 E6

Отзывы:

Похожие инструкции для Futura FHD2 E6

Бренды по названию

Популярные бренды

VDL Futura FHD2 E6, Руководство по ремонту

Результаты поиска

Содержание Futura FHD2 E6

Отзывы:

Похожие инструкции для Futura FHD2 E6

Бренды по названию

Популярные бренды