VDL Futura FHD2 E6, Руководство по ремонту

Страница: 174 / 184

0
Futura FHD2/FMD2 E6
INSTRUCTIONS FOR JACKING UP AND SUPPORTING THE VEHICLE
Lifting, jacking up and supporting
1 - 4
8
DD1020_01
1.2 WHEEL LIFTS
Lifting instructions using wheel lifts
1. Drive the vehicle as straight as possible to the middle of
the work area.
2. The contact switch must be turned off.
3. If necessary, place wheel adaptors on the wheel lifts (see
the supplier’s instructions and 1.7 Auxiliary tools for lift-
ing the vehicle (

1 - 14) ).
4. For a 2-axle vehicle, place the four synchronized wheel
lifts under the front axle and the rear axle.
For a 3-axle vehicle, place the six synchronized wheel
lifts under the front axle, the 2
nd
axle and the 3
rd
axle.
5. Lift the vehicle so that all the tyres are a couple of centi-
metres off the ground. Check the position of the wheels
in the wheel lifts.
ILHz0042
Wheel lifts
Always read the supplier’s instruction
manual and instructions before using the
wheel jacks and any auxiliary tools.
When the contact switch is turned on, the
height control system produces too
much movement, causing the vehicle to
become unbalanced.
It is not permitted to use four wheel lifts to
raise a 3-axle vehicle, because the lifting
equipment and/or the vehicle components
may be subjected to an excessive load.
Make sure the bodywork does not touch
the wheel lifts or any other obstacles.