manualshive.com logo in svg

VCS VideoJet X.21, Руководство пользователя

Поделиться
Скачать
VCS VideoJet X.21 Скачать руководство пользователя страница 44

Configuration with the NCTerminal Software

46

VideoJet X.21/G.703

 Manual

Installation of the 

NCTerminal

 

Program

The setup program installs the 

VideoJet X.21/G.703

 Terminal 

program in the selected directory and creates an icon.

Starting the Terminal Program

One of the serial ports of the 

VideoJet X.21/G.703

 device is 

connected directly to one of the COM ports of the PC using the con-
figuration cable included in the scope of supply. The 

VideoJet 

X.21/G.703

 device must not be connected to the power supply 

until it has been connected to the PC.

To start the terminal program, click twice on the new icon or start 
the program from the file manager or the Windows Explorer. When 
the software is started up, the field “Local device” changes to yellow 
as soon as a 

VideoJet X.21/G.703

 device has been found and 

responds. If the field remains grey, the connection between the 

Vid-

eoJet X.21/G.703

 and the PC, and the PC port setting must be 

checked. The port parameters can be configured in the system 
menu (click with the mouse on the symbol in the top left-hand cor-
ner) of the software under “Interface”. It is important to select the 
correct COM port.

To install the 

VideoJet X.21/G.703

 terminal program under 

Windows98, place the installation diskette in the disk drive, start 
“Software” in the control panel and select “Install”. The program 
then guides you through the installation procedure.

Содержание VideoJet X.21



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды