Vauxhall Signum, Руководство пользователя

Страница: 222 / 310

217 Driving and operation
Tyre chains 3
Limitations and further information – see
page 288.
Tyre chains are only permitted on the drive
wheels (front axle). They must be fitted to
the tyres symmetrically in order to achieve
a concentric fit.
Always use fine mesh chains that add no
more than 10 mm to the tyre tread and the
inboard sides (including chain lock).
Wheel trim on steel wheels could come into
contact with parts of the chain and be
damaged. Remove the wheel trim – see
page 237.
Tyre chains may only be used at speeds up
to 30 mph (50 km/h) and, when travelling
on roads that are free of snow, they may be
used for brief periods only since they are
subject to rapid wear on a hard road and
may snap.
Temporary wheel 3
Tyre chains must not be used on the
temporary spare wheel. If you need to use
tyre chains after suffering a flat front tyre,
fit the temporary spare on the rear axle
and transfer one of the rear wheels to the
front axle.
For notes on the temporary spare wheel –
see page 234.
Wheel changing – see page 236.
Correct tyre pressure.
Tyre pressure monitoring system
3 – see
page 204.