Vauxhall Signum, Руководство пользователя, Страница: 214 / 310

209 Driving and operation
Check the brake lights before starting out
on a journey. On vehicles with check
control 3 the brake lights are checked
automatically – see page 124.
Shortly after starting each journey the
effectiveness of the brake system should
be tested at low speed and without
inconveniencing other traffic, especially if
the brakes are wet, e.g. after the vehicle
has been washed.
The brake fluid level should be checked
regularly. If the brake fluid level is too low
and the hand brake is not applied, control
indicator R on the instrument panel
illuminates – see page 99.
Hand brake
Always apply the handbrake firmly without
actuating the release button; to do this fold
up the armrest 3 . Apply as fully as possible
on uphill or downhill inclines.
The mechanical hand brake acts on the
brakes on the rear wheels. It engages
automatically when applied.
To release the hand brake pull the lever up
slightly, press the release knob, and fully
lower the lever.
To reduce the operating forces of the hand
brake, depress the foot brake at the same
time.
Brake system control indicator R
The control indicator illuminates when the
ignition is switched on if the hand brake is
applied or if the brake or clutch fluid level is
too low. Brake fluid – see page 272.
9
Warning
If the control indicator comes on when
the handbrake is released, stop driving
immediately. Contact a workshop.