Vauxhall Signum, Руководство пользователя

Страница: 244 / 310

239 Self-help, vehicle care
6. Change the wheel. For notes on
temporary spare wheel – see page 234.
7. Screw in wheel bolts and tighten slightly,
inserting the wheel bolt wrench 3 as far
as possible.
8. Lower vehicle.
9. Tighten wheel bolts crosswise, putting on
wheel bolt wrench 3 as far as possible.
10. Before refitting the wheel trim, clean the
wheel around the retaining clips. Valve
symbol 3 on back of wheel trim must
point towards valve on wheel.
Align and refit wheel trim or wheel bolt
caps 3 .
Alloy wheels 3 : Align and refit wheel
bolt caps 3 .
11. Stow replaced wheel, tools and warning
triangle in luggage compartment – see
pages 232, 233 and 235.
12. Check the tyre pressure of the newly
mounted wheel. Correct if necessary.
13. Have the tightening torque of the wheel
bolts on the new wheel checked on the
vehicle using a torque wrench as soon
as possible and, if necessary, corrected.
Tightening torque – see page 288.
14. Replace the faulty tyre on the wheel
that was removed.
15. Replace temporary spare wheel with a
full specification wheel without delay.
Tyre repair kit
3
Minor damage to the tyre tread or side
wall, e.g. from foreign bodies, can be
repaired using the tyre repair kit.
Do not remove the foreign body from the
tyre.
Tyre damage exceeding 4 mm or that is on
the rim cannot be repaired with the tyre
repair kit.
Important information – see page 243.
In the event of a flat tyre:
z Switch on hazard warning lights,
apply hand brake; for automatic
transmission 3 , move selector lever to P ;
for manual transmission or Easytronic 3 ,
select 1st or reverse gear.
z Correctly set up the warning triangle.
Warning triangle – see page 235.
9
Warning
Driving with tyre pressures too low or
tyres deflated can cause invisible
damage to the tyre. This damage cannot
be eliminated with a tyre repair kit. Park
the vehicle and contact a workshop.