Vauxhall Signum, Руководство пользователя

Страница: 243 / 310

238 Self-help, vehicle care
3. There are plastic retainers at the front
and rear of the vehicle underbody for
positioning the jack. The location of each
retainer is indicated by a mark on the
bottom edge of the vehicle.
4. Before attaching jack 3 set to required
height by turning the eye by hand. Fit the
jack 3 at the front – or rear – in such a
way that the jack head engages in the
plastic retainer beneath the vehicle.
Check that it is properly engaged.
The jack base must be on the ground
directly below the jacking point in a
manner that prevents it from slipping.
Attach crank to eye of threaded rod and
turn crank to raise vehicle.
If this is not the case, carefully lower the
vehicle immediately and reposition the
jack.
5. Unscrew wheel bolts and wipe clean with
a cloth. Then apply a light coating of
grease to the wheel bolts. Do not grease
the thread of the bolts. Do not put the
wheel bolts down in a location where
they may become soiled.
If the wheel bolts have retaining
washers
3
, they must not be removed.