VAT 642 Series, Инструкция по установке и эксплуатации

Страница: 69 / 107

Series 642 INSTALLATION
813316EB Edition 2017-11-24 69/107
GENERAL WARNING bitmap table:
Bit Description
0 SERVICE REQUEST Valve movement tight
1 LEARN DATA SET Learn data not present. Learn required for adaptive pressure control.
2 NOT USED (reserved) -
3
POWER FAILURE
BATTERY
Not ready, voltage too low
4 SENSOR OVERLAPPING Sensor deviation between sensor 1 and sensor 2 >= ±10%
5
NOT USED (reserved)
-
6
NOT USED (reserved)
-
7-9 NOT USED (reserved) -
10
SENSOR
MEASUREMENT UNIT
FAULTY
AD-converter of Sensor input 1 and/or 2 (optional, only in case of 2 sensor version) on the
master board is faulty.
11-15
NOT USED (reserved)
-
EXTENDED WARNING bitmap table:
Bit Description
0
REMOTE CONTROL NOT
POSSIBLE
Remote control not possible, access mode local is active, change to acces mode remote or
access mode locked
1
ACTUAL CONTROL
MODE SETPOINT NOT
ALLOWED
Not possible to switch the actual control mode to CONTROL MODE SETPOINT
(for example control mode is interlock or fatal error)
2
ZERO DISABLED
Using zero function not possible
3
PFO DEACTIVATED
Power Failure Option is deactivated
4 NOT USED (reserved) -
5
OUT OF RANGE:
PRESSURE SETPOINT
Value of PRESSURE SETPOINT is out of range
6
OUT OF RANGE:
POSITION SETPOINT
Value of POSITION SETPOINT is out of range
7-9
NOT USED (reserved) -
10
OUT OF RANGE:
CONTROL MODE
SETPOINT
Value of CONTROL MODE SETPOINT is out of range
11
OUT OF RANGE:
GENERAL CONTROL
SETPOINT
Value of GENERAL CONTROL SETPOINT is out of range
12
PROCESS DATA
SETTING(S) NOT VALID
Value of PROCESS DATA SETTING(S) not valid
(DATA TYPE or RANGE of pressure and position signals)
13-15
NOT USED (reserved) -