Varta element Series, Инструкция по эксплуатации

Страница: 98 / 159

98
Subject to modification!
Updated 10/2017

The Settings page opens.

Click on the Basic settings tab.

Enter an individual name for the device. The maximum
length is 20 characters.

Enter the serial number(s) of the installed battery module
(expansion stage element 3/6)
or of the installed battery modules (expansion stage
element 6).
The sequence of the entry can be random.

Click on Apply .
i
The storage system cannot be commissioned
unless the correct serial number(s) of the
battery modules are stated.

Once the correct serial numbers have been entered, the
LED ring indicator changes from red to green.

If the LED continues to be red or to flash with a red light,
the following remedies have to be taken.
Remedy: LED ring flashes red
Error:
The current sensor check failed. Please switch the battery storage
system off and back on again.
If the LED ring continues to flash red after the restart (duration
approx. 3 minutes), check the connection to the current sensor
and the phase assignment.
If the LED ring continues to flash red, please contact VARTA
Storage GmbH.