Varta element Series Скачать руководство пользователя страница 46

Страница: 46 / 159

Subject to modification!

Updated 10/2017

Installation

This section is intended for the qualified
electrician.

7 Transport and storage

7.1

Transport

Lithium-ion batteries are hazardous goods. The battery modules

are constructed and tested in a way, so they are allowed to be

transported up to a total weight of 333 kg by complying with the

conditions of ADR 1.1.3.6 (transport not subject to labelling, as long

as there are no other hazardous goods on or inside the vehicle).

The other requirements of GGVSEB (ordinance on the national and

international carriage of hazardous goods by road, rail, and inland

waterways) and ADR (Agreement on Dangerous Goods by Road)

also have to be fulfilled. Delivery is made in tested hazardous

goods packaging.

Lithium-ion batteries were successfully tested according to

UN 38.3 transport test (UN Manual of Tests and Criteria, Part III,

subsection 38.3) and have passed.

The storage cabinet is packaged separately from the battery

modules.

Содержание element Series
































































































































































Результаты поиска

Содержание element Series

Отзывы:

Похожие инструкции для element Series

Бренды по названию

Популярные бренды

Varta element Series, Инструкция по эксплуатации

Результаты поиска

Содержание element Series

Отзывы:

Похожие инструкции для element Series

Бренды по названию

Популярные бренды