Varta element Series, Инструкция по эксплуатации

Страница: 142 / 159

142
Subject to modification!
Updated 10/2017

Set the terminal resistor to "open",
(see Figure 33).
Installing the battery charger

To reinstall, perform the working steps in reverse order. The
battery charger locks in the end position. It is not necessary to use
a screwdriver.
Note: At expansion stage element 9/12, pay attention to the
assignment of the battery cables.

Switch on the battery module at the activation button. At
expansion stage element 9/12, additionally switch on the second
battery module at the activation button.
11.4.4 Removing and installing battery modules
WARNING
Improper handling of the battery module!
Personal injuries and material damage
Do not damage the battery module
during removal and installation.
Do not attempt to repair it.
Battery modules are maintenance-free
and must not be opened under any
circumstances.