Vari Adela PRO BDR-720D, Перевод оригинальной инструкции

Страница: 35 / 68

BDR-720D Adela PRO
2.6 T
ROUBLESHOOTING
Problem Cause Solution
The engine will not start The petrol supply line is closed Open the petrol supply line
Defective spark plug Clean the spark plug from any dirt and adjust the distance
between the electrodes of the spark plug, or replace the
spark plug with a perfect one
Other defect Visit a service facility
The cutting disc is not
rotating
Insufficient belt tension Adjust the tension pulley
Torn belt Replace the belt
The belt has come off Re-mount the belt
Other defect Visit a service facility
The cutting disc brake
does not brake
There is no axial clearance in the bowden
cable, the cable is stretched
Adjust the brake
The brake key is not loose Lubricate
Brake lining is worn - brake cannot be
adjusted Visit a service facility
The cutting disc will not
stop
Blocked bowden cable divider Visit a service facility
The machine is not
moving Insufficient belt tension Adjust both the tension pulleys
Torn belt Replace the belt
The belt has come off Re-mount the belt
Other defect Visit a service facility
The machine travel will
not stop Broken travel pulley spring Replace with a new one
The inner bowden cable is stiff; bent bowden
cable Lubricate or replace the bowden cable
The tension pulley does not return back to its
position
Lubricate
The engine cannot be
turned OFF The engine control string does not control the
shortening contact Wait for an empty petrol tank and adjust
Other defect Visit a service facility
The control levers do not
return back.
The inner bowden cable is stiff; bent bowden
cable
Lubricate or replace the bowden cable
Broken return spring Replace with a new one
Other defect Visit a service facility
Another defect Visit a service facility
Table 24: Troubleshooting
2.7 M
ACHINE
A
SSEMBLY

Unpacking, assembly of the machine and instruction is part of the pre-sale service provided by the machine dealer.
Gripping points: at the rear of the handlebar holder tubes 1 . See the images of the individual steps Fig. 26
1 Gripping position at
the back
6 Handlebar
joint
11 Hexagon socket head cap
screw M6x20
16 Fenders
2 Handlebars 7 Screw M8x30 12 Safety washer 17 Handle
3 Horní kryt disku 8 Nut M8 13 Flat washer large A + D M6x20 + nut M6
4 Cutting disk top cover 9 Wing screw 14 Screw M6x20 B + C M6x20 + flat washer large + nut M6
5 Shift lever 10 Shift lever 15 Nut M6 E M6x16 + flat washer large + nut M6
Table 25: Legend for Fig. 1

Assemble the machine with the assistance of another person. Instructions regarding right/left directions are given from the
operator’s view.
Removal of the machine from its box >1 :
1) Remove the plastic cover of the cutting disc 3 , bag with small parts 4 , and shift lever 5 .
2) Cut / slice the box wall behind the back of the machine in the corners.
3) Press the service and parking brake lever on the left handlebar grip - in the machine package, it is the lever on the right wheel.
The red fuse will pop up, release the lever. The machine is released. Pull the handlebar holder tubes
1 out of the box.
35
R
ev
iz
e
0
7
/2
0
2
1