V&T TS-I Series Скачать руководство пользователя

Страница: 3 / 79

Foreword

−

I series synchronous servo driver is a high performance and

highly reliable servo driver with high responding speed for electrolytic

mixing system of the injection molding machine

. The product is based on a

flexible digital control module that uses high performance DSP, which realizes

high performance vector control, precision position and speed control,

non-linear weak magnetic high speed control and position calibration space

vector low speed control for each kind of control algorithm and software for

servo motors. In the meantime, in order to meet the high speed and high

precision servo control requirements, its embedded self immunity control and

speed control algorithm can realize better dynamic tracking and stable

performance, and realize the trye high speed response, high precision and high

reliably with the forward feed control of compensation servo and smoothing

technology. In addition, the product can decouple the PQ control algorithm

according to the features of the injection molding machine, increase the

response speed and smooth moving speed of the injection molding machine

and the mutual conversion of pressure control.

This manual is the operation and commissioning instruction manual for

−

I series synchronous servo driver for electrolytic mixing system of the

injection molding machine.

This manual provides the safety precautions, model selection, installation,

parameter setting, field commissioning, troubleshooting, and daily

maintenance knowledge for users. In order to correctly use this series servo

driver, read this manual carefully and keep it for future using. The customer

that integrates this product shall deliver the manual to the end user.

The user that uses this product for the first time should read the manual

carefully. If there is any question to the function and performance of the product,

please consult the technical support personnel of V&T to seek the help and

technical support so as to ensure the correct use of the product.

We are improving the servo driver continuously, so we reserve the right to

modify the manual without prior notice.

Содержание TS-I Series
















































































Результаты поиска

Содержание TS-I Series

Отзывы:

Похожие инструкции для TS-I Series

Бренды по названию

Популярные бренды

V&T TS-I Series, Руководство пользователя

Результаты поиска

Содержание TS-I Series

Отзывы:

Похожие инструкции для TS-I Series

Бренды по названию

Популярные бренды