Customized Functions
Multiple Function Code Display Modes
bASE: Basic menu mode, displays all the function codes.
FASt : Fast menu mode,display the common parameters to be used in the
commissioning
，
is especially suitable for the naive users.
ndFt: Non-factory setting menu mode, it only displays the function codes different
from the leave-factory values to facilitate the inquiry and commissioning.
LASt: Last change menu mode, it displays the 10 functions codes that are recently
changed and P0.02 to facilitate the inquiry and commissioning.
User can define the function codes for inquiry and modification by themselves.
Multiple Function Code Encryption Modes (to Protect the Intellectual
Property of the Customers)
User can encrypt any group function codes by themselves.
User can lock operation panel.
User can set function parameter password protection.
The technical secrets, such as system specific process parameters, cannot be
copied.
User Self-defined Parameter Display Function
User can choose the common parameters displayed by the operation panel and
use to >> key switch such parameters.
User can define the parameters displayed upon running and stopping respectively.
User can define such parameters as pressure, temperature, flux and line speed.
User can Make Secondary Development
Universal expansion port is provided as standard.
Physical port SPI bus, software protocol Modbus.
The ports p24V, ±15V and 5V power supply and two ways of A/D input.
The CPU expansion scheme can realize PLC function.
It supports the programming by user to realize process control.
Enhanced Function
Settable software filtering time for the AI1, AI2 and AI3 analog input to enhance
the anti-interference capacity.
Independent multi-section modification can be made on the AI1, AI2 and AI3
analog input curve.
Supporting the overload protection with motor temperature feedback.
Содержание TS-I Series
Страница 1: ...User Manual TS I series servo drive is introdution V T ...
Страница 2: ......
