V&T TS-I Series, Руководство пользователя

Страница: 19 / 79

TS − I Special servo drive for hybrid electro-hydraulic system of injection molding machine User Manual
Chapter 2 Installation and connection of servo driver 7
Chapter 2 Installation and connection of servo driver
2.1 Environment for Product Installation
„ Do not install the driver in the sites with oil mist, metal powder and dust.
„ Do not install the driver in the sites with hazardous gas and liquid, and corrosive, combustible and
explosive gas.
„ Do not install the drivers in salty sites.
„ Do not install the driver in the sites with direct sunlight.
„ Do not mount the driver on the combustible materials, such as wood.
„ Keep the drilling scraps from falling into the driver during the installation.
„ Mount the driver vertically in the electric control cabinet, mount the cooling fan or air conditioner to
prevent the ambient temperature from rising to above 45 ºC.
„ For the sites with adverse environment, we recommend you install the heatsink outside of the
cabinet or use the water cooled or liquid cooled driver.
2.2 Mounting Direction and Space
In order not to reduce the cooling effect of driver ， the driver must be mounted vertically, and certain
clearance must be maintained, as shown in Figure 2 − 1 and Figure 2 − 2.
Figure 2 − 1 Mounting direction and clearance for TS − I − 4T017A and below power class
"
Note:
When the
TS − I − 4T017A
and below power class drivers are mounted side by side in the cabinet,
please remove the upper dust filter and the lower leading board.
Air circulation position
Above 120mm
Air circulation position
Above 120mm
Above 30mm
Above 30mm