1
Turn the power button off.
2
Turn the circuit breaker off.
3
Close the air cock
Finish
Finish of sealing
Heating , cooling, and the seal pressure are the three
essential parameters for impulse sealers to make a good
seal, and also they greatly affect the seal finish. As the
setting values differs depending on the packaging
material and contents, please change the values for each
operation.
Seal sample is included in the accessories. Refer it as
the model to judge the seal performance.
(The mesh of fluoro glass sheet or silicone rubber
appearing clearly on the sealing area indicates the good
sealing performance.)
LOS-NT/NTW series Operating Instructions Ver.6.02E
33
Finish Operation
Attention
Please find the best sealing condition for
each packaging material on your own
responsibility.
For the thick gusset type pouches, please
pay extra attention if the package is
properly sealed as there are the film
overlapping parts.
[e.g. ) Put the package into the water so
you will know if there is air leakage.]
TIPS
Other setting procedure is explained in
another operating instructions for ONPUL.
When setting the new operating pattern,
please refer to operating instructions for
ONPUL.
Содержание LOS NT Series
