Van Der Stahl LOS NT Series, Руководство по эксплуатации

Страница: 24 / 64

［ 01 ］
źŸ&KDQJH 0RYH
HT xx
O
& x . x s &7 xx
O
&
2SHUDWLRQ1R
+HDWLHDWLQJWLPH &RROLQJWHPS
［ 01 ］
źŸ&KDQJH 0RYH
HT xx
O
F x . x s &7 xx
O
F
2SHUDWLRQ1R
+HDWLHDWLQJWLPH &RROLQJWHPS
1
2
3
4
5
6
7
8
9
Turn on the circuit breaker.
Open an air cock.
A pressure lever opens.
Turn on the power button.
Select the desired operation number.
Set heating temperature.
[Setting range: 60 ~ 250
° C /140 ~ 480 ° F]
Set heating time.
[Setting range: 0.0 ~ 2.0 seconds]
Set cooling temperature.
[Setting range: 40
° C/100 ° F ~ heating temp. set value]
Place a pouch to the sealing area.
Depress a foot switch (1st).
Operating Procedure
7 Preparation >>> 7-5 Turn ON the breaker
7 Preparation >>> 7-4 Set up an air source
7 Preparation >>> 7-6 Turn ON the power switch
Refer to “CONTROL UNIT FC16(6)R Operating Instructions”
>>> “4-2-2 Select a desired operation mode number.”
Operation mode = “01 SEALING ONLY”
Refer to “CONTROL UNIT FC16(6)R Operating Instructions”
>>> “4-2-5 Set heating temperature.”
Refer to “CONTROL UNIT FC16(6)R Operating Instructions”
>>> “4-2-6 Set heating time.”
“CONTROL UNIT FC16(6)R Operating Instructions” >>> “4-2-
7 Set cooling temperature.”
Hold the sides of the pouch and place it to the sealing area.
Pressure lever descends to clamp the pouch. Do not release
the foot switch until the lever descends completely.
Reference Item or Description
Display
LOS-NT/NTW series Operating Instructions Ver.6.02E
24
8-1 Operation No. [01] <Sealing only>
Attention
When the lever is being lowered, removing
foot from the footswitch will raise the lever
from its lowered position.