Van Der Stahl LOS NT Series, Руководство по эксплуатации

Страница: 3 / 64

100V
15A以下
200V
20A
100V
20A
200V
30A
100V
20A、30A
Please read all of the safety and operating instructions before operating this machine. Periodic
maintenance and proper operation are necessary to ensure safety when using this impulse sealer.
Keep this manual on hand when operating the sealer.
Set the heating temperature according to the material and thickness of the film.
As a result of research to further improve the LOS-NT/NTW , some details in the operating
instructions may differ from your actual machine. For operating problems or product
information, please contact your local dealer or
Van der Stahl Scientific .
Before using, always verify the voltage specification of your particular unit and operate it at the
correct voltages. Please note the following.
1 The voltage specification of your unit is listed on the label which displays the serial
number.
This label can be found on the machine body.
2 Please confirm the plug configuration on your specific unit.
The explanations and illustrations in this operator's manual utilize the plug configurations
most common in Japan.
LOS-NT/NTW series Operating Instructions Ver.6.02E
3
Foreword
This manual is designed to cover machines of various voltages and
plug configurations
About the warning labels
The following marks are used in this manual to easily identify the conditions of risks, damages,
or some tips for the optimal use of your unit.
Caution
・・ Minor injuries or damages to the unit may occur when the instruction is
ignored.
Warning
・・ Severe injuries or fatal accidents may occur when the instruction is
ignored.
Danger
・・ Critical injuries or fatal accidents will almost certainly occur when the
instruction is ignored.
Attention
・・ Important Notes and Restrictions - Read the directions in order to avoid
misuse of the unit.
TIPS
・・ Great Tips and References when using the unit - Highly recommend
reading through the information.
Warning Voltages and plug configurations differ according to various worldwide specifications.
Always verify those of your particular unit before beginning operation. Connecting the
power cord to an outlet of a different specification is extremely hazardous.