Van Der Stahl LOS NT Series, Руководство по эксплуатации

Страница: 17 / 64

Foot switch is included in the accessories. Inert it to the
socket for the foot switch on the side of the machine.
Tighten the collar to fix the foot switch.
(The air compressor is not included in this machine.
Please prepare for the air compressor by yourself.)
Compatible Compressor
NT series /clean air: 0.75kW, 80L/min, 0.6MPa or greater
NTW series /clean air: 1.5kW, 165L/min, 0.6MPa or greater
Air Piping
Use flexible tube or air hose.
Air Cock
After connecting tube or air hose to the air connector,
open the air cock and adjust the air pressure.
After the operation, please make sure to close the cock.
Adjust the Air Pressure
Pull up the air pressure adjustment knob and turn it
clockwise to increase the air pressure. Push the knob at
the optimum position to set the air pressure, and lock it
by fitting into the grooves.
[Air pressure setting value: NT series 0.5MPa
NTW series 0.55MPa]
LOS-NT/NTW series Operating Instructions Ver.6.02E
17
,QVWDOODIRRWVZLWFK
7-4 Set up an air source
Attention
With the auto drain specification, the drain
will be exhausted all the time while the air
supply is stopped.
Caution
Insert the air tube or hose fully to the air
regulator connector, and fix it using the hose
band.
A pressure lever opens when the air is
supplied. Keep clear of the lever.
Collar
Foot switch
Foot switch plug
Adjustment knob
Pressure gauge
Air cock
Air connector