Valiani OMNIA, Инструкция по эксплуатации и техническому обслуживанию

Страница: 33 / 66

OMNIA
29
• Connect the loader connector to the machine panel and close the locking tabs.
Figure 5-23
• Close the machine panel and the loader panels removed previously ( Figure 5-22 and Figure 5-15).
5.7.2 ELECTRICAL CONNECTION
Attention: it is mandatory that the electrical system, to which the
machine is connected, is equipped with a differential switch.
• Connect the machine to the mains power supply
5.7.3 POWER ON AND CHECK CONNECTION
•Please ensure that the system has been previously tested and the rated voltages
verified.
•
Turn on the power master switch.
•
Check that all the emergency buttons are not pressed and if they are, reset
them. (Paragraph 6.1).
•
Press the power button and check that its indicator light turns on. par. 6.2.
•
Put the loader selector in manual mode (MAN) and try moving the UP / DOWN
selector (Figure 6-4) to check if the load box moves in the selected direction, if
it moves in the opposite direction turn off the machine general power panel.
Contact an electrician for the reversal of a phase on the machine connection
extension after it has been disconnected from both the power supply and the
machine.
Figure 5-24
Figure 5-25