Valiani OMNIA, Инструкция по эксплуатации и техническому обслуживанию

Страница: 15 / 66

OMNIA
11
3.2 CUTTING TOOLS
The machine can use three tools that allow a greater variety of cuts, types of workable materials
Grey – Tangential Drag Knife (included): The
tangential cutting tool allows you to cut a wide
variety of materials with a maximum thickness
of 5mm
(0.196”). The use of drag knife allows
you to perform cuts even at high speed.
Depending on the blade holders and the king of
job the machine is supposed to perform the following blade might be available:
Code Description Fields of use
L100 Multipurpose Blade. 50°Angle
Universal knife for materials such as paper,
cardboard, thin plastic, soft PVC, Foam Board.
L100B
Multi-purpose Blade. 38 °Angle for a
more precise cut on small radius. Universal knife for materials such as paper,
cardboard, thin plastic.
L1W40
Carbide multipurpose blade for a longer
sharpening duration. 50 ° angle. Long lasting blade ideal for very abrasive
materials. (See L100)
L1W46
Carbide multipurpose blade for a longer
sharpening duration and with a 38 ° angle
for greater precision on cuts with a
reduced radius.
Long lasting blade ideal for very abrasive
materials. (See L100B)
002156
Multipurpose T16 Blade (38° Angle)
Universal knife for soft materials. To make
sharp edges.
002157
Multipurpose T17 Blade, with a tighter
angle for greater precision on cuts with a
small radius. (25° Angle)
Sole leather, cardboard, thin polyester. To
make sharp edges.
Note: For any special need, other blades might be available. Please contact your local Valiani dealer, or the manufacturer
for further information.
Black - Oscillating Cutting Knife
(Optional):
The oscillating cutting
tool is operated by compressed air
and it is suitable for both soft and
rigid materials. The tool reaches a
number of 9.000 oscillations per
minute (rpm) with a stroke of 8mm
(0.315”) . Depending on the blade
used, it can cut up to 20 mm (0.787”)
thick *. Minimum use pressure: 7 Bar
* With TC25 Blade.
Depending on the work to be performed, the following blades are available:
Code Description Fields of use
002720
TC 5mm Blade
Gasket material, solid cardboard, foam cardboard,
foamboard with paper surface, foamed materials, soft
foam panels, corrugated cardboard, packaging material,
honeycomb cardboard.
001899
TC 10mm Blade
001898
TC 15mm Blade
001897
TC 25mm Blade
Note: For any particular need, other blades might be available. Please contact your local Valiani dealer, or the
manufacturer for further information.
Figure 3-2
Figure 3-3