Valiani OMNIA, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 66

OMNIA
2
1.4 SAFETY PRECAUTIONS (DANGER)
Danger
Do not touch the rollers or moving parts such as the carriage while cutting or plotting is in progress.
Such action may result in injury
Be sure to ground the earth terminal. If the cutting plotter is not grounded, the operator could suffer
an electric shock in the event of current leakage.
Keep your hands, hair, etc., away from the rollers or moving parts such as the carriage even if the
machine is stopped, as it may suddenly start moving when data is received. Such action may result in
injury.
Do not disassemble, repair, or modify the machine. Such actions may result in an electric shock or
create a fire hazard due to current leakage. Contact with the high-voltage parts within the cutting
plotter may also cause an electric shock. If the machine requires repairs, please contact your sales
representative or your nearest Valiani vendor for advice.
Do not connect the machine to a non-rated power supply. The use of a different supply voltage may
result in an electric shock or create a fire hazard due to current leakage.
Do not use the machine in a location where it might be exposed to water, rain, or snow. Such locations
may cause electric shock or create a fire hazard due to current leakage.
If the machine generates smoke, overheats, emits a strange odor, or otherwise functions abnormally,
do not continue using it. Turn off the power and unplug the power cord from the electrical socket. Use
of the cutting plotter in such a condition may result in a fire hazard or electric shock. After confirming
that smoke is no longer being emitted, contact your sales representative or nearest Valiani vendor for
repairs. Never attempt to perform repairs yourself. Repair work by inexperienced personnel is
extremely dangerous.
Do not allow dust or metal scraps to adhere to the power plug. A dirty power plug may result in electric
shock or create a fire hazard due to current leakage.
Do not use the power cord if it is damaged. Use of a damaged cord may result in electric shock or create
a fire hazard due to current leakage. Replace the power cord with a new one.
Be careful when handling the cutting blade. Touching the blade with your bare hands may cause injury.
Always wear gloves when handling blades. Do not touch the cutter blade whilst cutting is in progress.
The machine while using oscillating tools, router and dust aspirator emits a sound pressure higher than
78 dB (A), for which the use of PPE is required.