Valiani OMNIA, Инструкция по эксплуатации и техническому обслуживанию

Страница: 22 / 66

OMNIA
18
4.1 STORING A PACKED MACHINE
To protect the machine (and any other components supplied) for storage please wrap them in protective plastic
sheeting. In the case of prolonged storage unpack the machine and place it in a safe place with temperatures between
5°C (41° F) and + 40°C (104° F) and with humidity not higher than 80%. Protect all machine parts that are not painted by
applying an anti-corrosive oil
and rease all moving parts. Then wrap the machine in protective plastic sheeting. Repeat
this operation every 6 months that it remains unused.
4.2 STORING AN UNPACKED MACHINE
Should the unpacked machine (and any other components supplied) remain unused for a long period it should be placed
in a suitable location with a temperature of between 5°C (41° F) and + 40°C (104° F) with humidity not exceeding 80%.
Should the machine (and accessories) not be used for a long period of time it should be stored as described above.
4.3 TRANSPORTING THE UNPACKED MACHINE
The unpacked machine, being completely dismantled, should only be moved for assembly operations as described in
the following section.
5 INSTALLATION
5.1 UNPACKING THE MACHINE
Carefully remove the corrugated cardboard box trying not to damage it (it may need to be re-used), until the contents
are fully checked, installed and verified as working correctly.
Remove the cardboard fillers and the plastic protection material, and then identify the components present in the
various boxes:
Depending on the mode of transport, or customer
needs, the machine could be contained in a single
package or divided onto multiple pallets.
The machine is shipped pre-assembled. The carton
includes one (1) box with accessories. Check the
integrity of the components and their numbers.
Should there be any damaged or missing parts,
please notify both the forwarding company that
made the delivery and Valiani immediately
Note: Depending on the shipping methods, some
of the operations listed below may not be
necessary or may differ slightly.
Machine Loader Unloading Trolley
L1 W1 H1 L2 W2 H2 L3 L4 W3 H3
Omnia 80 2200mm
86.61”
1780mm
70.08”
1650mm
64.96” 1615mm
63.58”
1410mm
55.51”
1465mm
57. 67”
1120mm
44.09”
110mm
4.33”
900mm
35.43” 1090mm
42.91”
Omnia 80DUO
Omnia 100
2500mm
98.42”
2100mm
82.67”
1670mm
65.75”
1500mm
59.05”
///
950mm
37.4”
Figure 5-1
W1
L1
H1
W2
H2
L2
L3
L4
W3
H3