41
•
+/- 1.5g = press ‘1’
•
+/- 2.0g = press ‘2’
•
+/- 4.0g = press ‘3’
•
+/- 6.0g = press ‘4’
You can also hit ‘x’ to exit without changing the setting.
Note: calibration must be performed every time that the sensor g-range is changed.
Display Mode
Press ‘5’ from the top menu to set the display mode. You will be prompted to select either
gravity values – press ‘1’; raw ADC values – press ‘2’; or binary values – press ‘3.’ You can also
hit ‘x’ to exit without changing the setting.
Raw and Gravity Output Formats
Raw ADC and calculated gravity values are output in ASCII form for ease of reading. For
example, here is what you can expect to see in Raw Mode with all channels active and threshold
set to zero:
