Valcourt L48, Инструкция по установке и руководство пользователя

Страница: 45 / 84

Page 45 Installation Instructions and Owner’s Manual - L48
ENGLISH
Installation
1. Check the rear liner panel to make sure
it is not bowed.
Note: The bottom edge
has eight tabs that must be in a straight
line to match up with the slots at the
rear of the firebox. Check to make sure
the insulation on the back of the panel
remains in place before installation.
2. Install the rear panel by aligning the eight
tabs on the bottom edge with the eight
slots in the back rear of the firebox.
Note:
The eight slots are located behind the
burner cover plate. See
«Figure 74» .
SLOTS
TABS
Figure 74
4. Once the tabs are inserted into the slots,
rotate the rear panel upward against the
back of the firebox. See
«Figure 75» .
Figure 75
6. Re-install the two previously removed
screws (step 6 in Preparation section)
through the top tabs of the rear panel to
secure.
Figure 76
7. Check to make sure the insulation is
secured to the back prior to installing the
right side panel. Place the right side panel
so the two rear tabs align with the two
slots at the right end of the rear panel.
Figure 77
8. Hold the front of the panel against the side
retainer bracket, then, shift the side panel
reward to engage the rear tabs and slots.
At the same time, hook the front flange
of the side panel over the side retainer
bracket.