Valcourt L48, Инструкция по установке и руководство пользователя

Страница: 42 / 84

Page 42 Installation Instructions and Owner’s Manual - L48
ENGLISH
Remote Light Control
If the fireplace is equipped with variable
halogen lights, the intensity of the lights can
be controlled by the proflame system. The
light has five levels of intensity, plus off. To
activate this function, use the MODE button
(
«Figure 55» ) to index the light control icon.
Use the up/down arrow buttons to turn On/Off,
or adjust the light intensity level. See
«Figure
67» . A single beep will confirm reception of the
command.
OFF
OFF
Figure 67
Pilot Selection
With the system in OFF position press the
MODE Button (
«Figure 55» ) to index to the CPI
mode icon. See «Figure 68» .
Pressing the up arrow button will activate the
CPI. Pressing the down arrow button will return
to IPI. A single beep will confirm the reception
of the command.
OFF
OFF
Figure 68
Button Lock
This function will lock the buttons to avoid
unsupervised operation.
To activate this function, press the MODE and
UP buttons at the same time.
To deactivate this function, press the MODE
and UP buttons at the same time.
OFF
Figure 69
Low Battery Power Detection
The life span of the remote control batteries
depends on various factors: quality of the
batteries used, the number of ignitions of the
fireplace, the number of changes to the room
thermostat set point, etc.
When the transmitter batteries are low, an
Icon will appear on the LCD display of the
transmitter before all battery power is lost.
When the batteries are replaced this icon will
disappear.
OFF
Figure 70