Valcourt L48, Инструкция по установке и руководство пользователя

Страница: 41 / 84

Page 41 Installation Instructions and Owner’s Manual - L48
ENGLISH
Disabling Thermostat Feature
With all the (3) AAA type batteries installed:
1. Take out one AAA battery.
2. While re-inserting the AAA battery, push
and hold down the thermostat button.
This will disable the thermostat feature on
the transmitter.
Room Thermostat
The remote control can operate as a room
thermostat. The thermostat can be set to a
desired temperature to control the comfort
level in a room. To activate this function,
press the THERMOSTAT button (
«Figure
55» ). The LCD display on the transmitter will
change to show that the room thermostat is
ON and the set temperature is now displayed.
See
«Figure 64» . To adjust the set temperature,
press the up or down arrow buttons until the
desired set temperature is displayed on the
LCD screen of the transmitter.
Figure 64
Smart Thermostat
The smart thermostat function adjusts the flame
height in accordance to the difference between
the set point temperature and the actual room
temperature. As the room temperature gets
closer to the set point the smart function will
modulate the flame down.
To activate this function, press the thermostat
button until the word SMART appears to the
right of the temperature bulb graphic. See
«Figure 65» . To adjust the set temperature,
press the up or down arrow buttons until the
desired set temperature is displayed on the
LCD screen of the transmitter.
Note: When Smart Thermostat is activated,
manual flame height adjustment is disabled.
Figure 65
Blower Control
The speed of the blower can be controlled by
the proflame system. The blower speed can be
adjusted through six speeds. To activate this
function, use the MODE button (
«Figure 55» )
to index the blower control icon. Use the UP/
DOWN arrow buttons to turn on, off or adjust
the blower speed. A single beep will confirm
reception of the command.
OFF
OFF
Figure 66