Valcourt L48, Инструкция по установке и руководство пользователя

Страница: 40 / 84

Page 40 Installation Instructions and Owner’s Manual - L48
ENGLISH
Turn On the Fireplace
With the system OFF, press the ON/OFF button
on the transmitter. The transmitter display will
show some other active icons on the screen.
At the same time the receiver will activate the
fireplace. A single beep from the receiver will
confirm reception of the command.
Turn OFF the Fireplace
With the system ON, press the ON/OFF
button on the transmitter. The transmitter LCD
display will only show the room temperature.
At the same time, the receiver will turn off
the fireplace. A single beep from the receiver
confirms reception of the command.
Remote Flame Control
The Proflame has six flame levels. With the
system on and the flame level at the maximum
in the fireplace, pressing the down arrow
button once will reduce the flame height by
one step until the flame is turned off.
The up arrow button will increase the flame
height each time it is pressed. If the up arrow
button is pressed while the system is on but
the flame is off, the flame will come on in the
high position. See
Figure 60 through Figure
63 . A single beep will confirm reception of the
command.
OFF
Figure 60 : Flame OFF
OFF
Figure 61 : Flame Level 1
OFF
Figure 62 : Flame Level 5
OFF
Figure 63 : Flame Level Maximum