© Valco Cincinnati, Inc.| 411 Circle Freeway Dr.| Cincinnati, OH 45246 | USA
www.valcomelton.com | TEL: (1) 513-874-6550 | FAX: (1) 513-874-3612
Doc. IS0xxx
Rev.04 | Date: August 25, 2021
MCP-8I Quick Start Guide
Glue Line End Early & Late Tolerances
Figure 36: Glue Line End Tolerances Navigation
The
Glue Line – Early End
is the maximum allowed distance the pattern is allowed to end early
and still be considered
Good and within tolerance
. The
Glue Line – Late End
is the maximum
allowed distance the pattern is allowed to end late and still be considered
Good and within
tolerance
. Anything outside of the +/- Tolerance will trigger a failure.
As shown in Figure 29:
·
Zone 1 - is the Pattern End location that will cause a failure because the pattern
Ended
Early Outside of the Tolerance window
.
·
Zone 2 - is the Pattern End location that will cause a pass because the pattern
Ended
Early within of the Tolerance window
.
·
Zone 3 - is the Pattern End that will cause a pass because the pattern
Ended Late
within of the Tolerance window
.
·
Zone 4 - is the Pattern End that will cause a failure because the pattern
Ended Late
Outside of the Tolerance window
.
Figure 37: End Tolerances Example
