7
EN
Using the appliance
B
Connecting the water supply
NOTE
:
The water pressure required to operate the machine
must be between 1 and 10 bar (0.1 - 1 MPa). 10-80 litres of
water from a tap which has been left fully open for a minute
are required to ensure that the machine can operate smoothly.
Attach a pressure reducing valve if the water pressure is too
high.
WARNING
:
•
Single inlet models should not be connected to the hot water
tap. This type of connection would damage the laundry or the
product would switch to protection mode and could not work.
•
Do not use old inlet hoses with your new product. They could
stain your laundry.
1. Tighten the hose nuts by hand. Never use a tool to tighten these nuts.
2. Once the hose is completely connected, check for leaks at the connection points by
opening the taps fully. If you notice any leaks, turn off the tap and remove the nut. Tighten
the nut carefully after checking the seal. To prevent water leakage and water damage, keep
the taps closed when not in use.
