Val Controls IDC24-A, Руководство пользователя

Страница: 6 / 74

DID-UM-002
Val Controls A/S
•
Limfjordsvej 3
•
DK-6715 Esbjerg N
•
Tel. +45 7547 0600
vc@valcontrols.com
•
www.valcontrols.com
Revision: 10
6/74
4 Interface
4.1 LEDs
LED Colour ON OFF Blinking
System: Red Red System error - Calibrating
System: Green Green System OK - Initializing
ESD Red ESD trip ESD normal -
Local Yellow Local mode Remote mode -
Closed
1
Red Valve is closed - Moving towards close
Open
1
Green Valve is open - Moving towards open
Pump Green Pump is running - -
MT Red MTControl is locked - -
TIP Yellow Test in progress - -
Fail Red Last test failed - -
Pass Green Last test passed - -
1
) Open/close can be switched in the Interface section in ValConnect
System: Red and System: Green are the only LEDs available on the F model.
If both System: Red and System: Green is ON, the device is in bootloader mode. Power cycle the
device to return to normal operation.
4.2 MTControl
MTControl can be used to operate the AF models without opening the Ex d enclosure. It requires a
magnetic pen to “press” the buttons. The magnet must be aimed just beneath the buttons, see Figure
1. To unlock MTControl activate
→
and then

, the red MT LED will turn off if MTControl is
unlocked.
Figure 1: MTControl sensitive area