vNet Power over Ethernet Device User Guide
31
Note:
If you do not keep IP address settings and pass-
word, the IP settings will revert to DHCP, and the
administrator password will revert to ‘dbps’.
4
Click
Apply
.
Restoring factory default settings will take about 45 seconds to
complete. The vNet devicewill restart automatically and the web
interface will reload.
To manually restore factory default settings:
On the vNet device itself, press and hold the restart but-
ton for at least five (5) seconds. (Refer to Figure 4,
“Restart button on vNet device,” on page 29). There is
no warning before the factory default settings are
restored.
List of Factory Default Settings
For an explanation of each setting shown below, refer to
Table 1, “Configuration Backup File” on page 25.
These configuration items are changed to their factory
default settings if the
Keep IP Settings and Administrator
Password
checkbox is checked:
Item
Setting
RealPort
771
RawPort
9761
IdleTimeout
5
CloseTimeout
True
DeviceName
vNet XXXXXXXX, where “X” is the 8-
digit serial number of the vNet device
Contact
(blank)
Enable15V
Off (if installed)
EnableFan
On (if installed)
Table 2: Factory Default Settings not including IP Settings and
Administrator Password