30
© 2010 Veriteq Instruments Inc.
Restoring Factory Default Settings
You may need to restore the vNet device configuration to
factory default settings if:
• you forgot the administrator password
• you changed the TCP port for HTTP but don’t remember
what it is
• you want to remove all custom configuration changes
Before restoring factory default settings, you must choose
whether or not you want to keep the IP settings and
administrator password you have already set
(recommended).
Important:
If you do not check the option to keep the
current IP settings, DHCP is automatically
enabled. This could result in the vNet device
acquiring a new IP address if it had previ-
ously been configured with a static IP
address. If this happens, you will need to
rediscover the vNet device using the Digi
Device Discovery software (
Start | Digi | Digi
Device
Discovery
).
You can restore default settings on the vNet device using the
web interface or from the vNet device itself using the restart
button.
To restore factory default settings using the Web interface:
1
From the vNet Configuration and Management interface,
choose
Utilities | Factory Default Settings
.
2
To keep the IP address settings and administrator
password but reset all other settings to the factory
defaults, select the option
Keep IP Settings and
Administrator Password
.
3
If you do not want to keep IP address settings, clear the
checkbox.