vNet Power over Ethernet Device User Guide
29
The vNet Configuration and Management interface takes
about 1 minute to reload after restarting.
Important:
Restarting the vNet device will disconnect all
connected clients and close their sessions.
Closing a connection to a client disrupts com-
munication between the client and the data
logger that is attached to the vNet device.
You can restart the vNet device from the vNet Configuration
and Management interface or from the vNet device itself.
To restart the vNet device using the Web interface:
1
From the vNet Configuration and Management interface,
choose
Utilities | Restart Device
.
2
From the Restart Device screen, click
Restart
.
3
At the Restart prompt, click
Yes
.
To manually restart the vNet device:
On the vNet device itself, press and immediately release
the restart button. (Refer to Figure 4, “Restart button on
vNet device”.)
Important:
Do not press the restart button for more than
one (1) second, or you might restore all set-
tings to their factory default values.
Figure 4: Restart button on vNet device