background image

List of Tables

Table 1

Document Versions................................................................................................5

Table 2

Input and Output.................................................................................................. 17

Table 3

Indigo 202 Modbus Registers...........................................................................39

Table 4

Default Modbus Serial Communication Settings........................................40

Table 5

Indigo Transmitter Messages Shown on Display.........................................59

Table 6

Input and Output.................................................................................................. 61

Table 7

General.....................................................................................................................61

Table 8

Standards and Compliance...............................................................................62

Table 9

Wireless Access Point (Module With Internal Chip Antenna)................. 62

Table 10

Operating and Storage Environment............................................................. 62

Table 11

Mechanics.............................................................................................................. 63

Table 12

Spare Parts and Accessories.............................................................................63

Table 13

Supported Function Codes...............................................................................65

Table 14

Device Identification Objects........................................................................... 65

Table 15

Modbus Status Registers (Read-Only)..........................................................66

Table 16

Bits in Register E001

hex

......................................................................................66

Indigo 202 User Guide

M211966EN-A

4

Содержание Indigo 202













































































Отзывы: