Vaisala Indigo 202, Руководство пользователя

Страница: 15 / 76

3. Installation
3.1 Mounting
1. Open the 4 screws on the transmitter cover and pull the cover off the base.
To avoid damaging the connector pins of the transmitter, pull the
transmitter cover off the base in a straight angle. Do not twist or bend.
CAUTION!
2. Place the transmitter base on the installation surface and mount it with 3 screws. See
the screw positions in Figure 1 .
3. Lead the input/output cable inside the transmitter (see Wiring Options ). If you are
wiring through the lead-through on the bottom of the transmitter, test that the strain
relief works with your cable.
4. Connect the input/output cable's wiring to the screw terminals (see Indigo Transmitter
Base ) and reattach the cover when done.
5. When you have finished wiring and reattached the cover, switch on the power supply
input.
Chapter 3 – Installation
13