USER'S GUIDE____________________________________________________________________
96 __________________________________________________________________ M210704EN-F
List of Serial Commands
All commands can be issued either in uppercase or lowercase. In the
command examples, the keyboard input by the user is in
bold
type.
The notation <cr> refers to pressing the carriage return (
Enter
) key on
your computer keyboard. Enter a <cr> to clear the command buffer
before starting to enter commands.
In the tables below, the
bold
text in the brackets is the default setting.
Table 16
Measurement Commands
Command Description
R
Start the Continuous Outputting
S
Stop the Continuous Outputting
INTV [
0
... 255
S
/MIN/H]
Set the Continuos Output Interval (for RUN
mode)
SEND [0 ... 255]
Output the reading once
SMODE
[STOP
/RUN/POLL/MODBUS]
Set the Serial Interface mode
SDELAY
View or set user port (RS232 or RS485)
answer minimum delay
SERI [baud p d s]
User Port Settings (Default: 4800 E 7 1)
ADDR
[0
... 255]
Set the transmitter address (for POLL and
MODBUS modes)
NET
View or set networking parameters for LAN
and WLAN interfaces
WLAN
View or set wireless network parameters for
WLAN interface
OPEN
[0
... 255]
Open Temporarily Connection to a POLL
Mode Device
CLOSE
Close the Temporary Connection (Back to
POLL Mode)
Table 17
Formatting Commands
Command Description
FORM
Set the output format of SEND and R
commands
FST
Add the state of Autocal, purge and sensor
warming in connection with SEND and R
commands
SCOM
Assign a new command name that works like
the SEND command
FDATE
Add date to R and SEND outputs
FTIME
Add time to output to SEND and R outputs
