Chapter 7 ___________________________________________________Calibration and Adjustment
VAISALA ______________________________________________________________________ 159
Adjustment Information
These data are shown on the device information. (see section Device
Information on page 110. Use the display/keypad to feed the adjustment
information.
1.
If you are not in the adjustment menu, press the ADJ button on the
motherboard to open the
ADJUSTMENT MENU
.
2. Press
the
►
arrow button to select
Adjustment info.
3. Select
Date
, press
SET
. Enter the date by using the arrow buttons.
Press
OK
.
4. Select
i
, press
CHANGE
. Enter information text including 17
characters at maximum by using the arrow buttons. Press
OK
.
5. Press
EXIT
to return to the basic display.
CTEXT and CDATE
Use the serial line command
CTEXT
to enter text in to the adjustment
information field. First press the adjustment button on the motherboard
inside the transmitter.
Example:
>
ctext
Adjust. info : (not set) ?
-60ºC IKØ
>
Use the
CDATE
command to input date to the adjustment information
field. Set the adjustment date in format YYYY-MM-DD.
Example:
>
cdate
Adjust. date : (not set) ?
2004-05-21
>
Press the adjustment button on the motherboard inside the transmitter to
disable the adjustment function.
