Chapter 4 ________________________________________________________________ Operation
VAISALA ______________________________________________________________________ 111
Proceed in the information views by pressing the
MORE
button as many
times as you get the desired information. You can browse through the
information displays also with arrow buttons. Press
OK
to return to the
basic display.
Use the serial line command
?
to check the current transmitter
configuration. Command
??
is similar but can also be used if the
transmitter is in POLL mode.
?
<cr>
Example:
>
?
DMT340 / 5.10.0
Serial number : D1140055
Batch number : D0750008
Adjust. date : 2008-03-17
Adjust. info : Helsinki / FIN
Date : 2000-01-02
Time : 01:33:57
Serial mode : STOP
Baud P D S : 19200 N 8 1
Output interval: 10 s
Address : 0
Echo : ON
Pressure : 1013.25 hPa
Filter : OFF
Ch1 output : 0...1V
Ch2 output : 0...1V
Ch1 Tdf low : -20.00 'C
Ch1 Tdf high : 100.00 'C
Ch2 H2O low : 0.00 ppmV
Ch2 H2O high : 5000.00 ppmV
Module 1 : not installed
Module 2 : not installed
>
