USER'S GUIDE____________________________________________________________________
86 __________________________________________________________________ M210704EN-F
IP Configuration
The IP settings of the LAN and WLAN interfaces are described in Table
14. The current settings can be viewed on the serial line or using the
device information display; see section Device Information on page 110.
Table 14
IP Settings for the LAN and WLAN Interfaces
Parameter Description
Automatic configuration
(DHCP)
If enabled, the transmitter will retrieve its
network settings (including the IP Address) from
a server in the network. If disabled, static
network settings are used instead.
Web configuration
If enabled, the settings of the interface can be
changed using a web browser. The
configuration page can be accessed by
browsing to the IP address of the transmitter.
IP Address
The four part network ID of the transmitter. Must
be set manually if automatic configuration is not
used.
Example value:
192.168.0.222
Netmask
Used together with the IP address to determine
which network the transmitter is a part of. Must
be set manually if automatic configuration is not
used.
A common netmask is
255.255.255.0
Gateway
IP address of the server that enables the
transmitter to access other networks. Must be
set manually if automatic configuration is not
used.
Example value:
192.168.0.1
MAC
The MAC address is the unique hardware
address of the LAN or WLAN interface. Cannot
be changed.
Using Display/Keypad
You can configure the IP settings of the LAN and WLAN interfaces
using the display/keypad as follows:
1.
Press any of the arrow buttons to open the
Main Menu
.
2. Press
the
►
arrow button to select
Interfaces
.
3. Press
►
arrow button to select
Network settings
. There will be a
delay as the transmitter refreshes the network information.
