Vaderstad RAPID RDA S Series Скачать руководство пользователя

Страница: 98 / 122

Troubleshooting

Ver.2 01.11.2002

6.3

Alarm list

2 Low seed level, right-hand

side.

- Check the seed level of the seed hopper.

If there is seed in the seed hopper:

- The sensitivity of the sensor has been incorrectly set.

3 Low seed level, left-hand side.

- See alarm no. 2.

9 The left seed box does not ro-

tate.

If the seed box does not move:

- Check whether the transmission between the drive

wheel and the seed box is intact.

If the alarm is generated even
though the seed box rotates:

- Check which alarm time has been programmed.

- Check the cables, connectors and connections.

- Check the operation of the sensor. The LED of the

sensor should light when the toothed plate passes. The
distance between the sensor and the toothed plate
should be 1 - 2 mm. Adjust if necessary.

A lit LED, however, is not necessarily any guarantee
that the sensor is operating.

- Check the condition and mounting of the toothed

plate.

10 The right seed box does not

rotate.

- See alarm no. 9.

14 Tramlining, right.

- The alarm is generated if tramlining does not take

place when the Control Station outputs a tramline sig-
nal or if tramlining takes place when the Control Sta-
tion does not output a tramline signal.

- Check the function of the tramline components in the

distributor head: motor, turn plate, springs and doors.
Clean if necessary.

- Check the cable, connector and connection of the sen-

sor.

- Check the sensor.

15 Tramlining, left.

- See alarm no. 14.

Содержание RAPID RDA S Series



























































































































Результаты поиска

Содержание RAPID RDA S Series

Отзывы:

Похожие инструкции для RAPID RDA S Series

Бренды по названию

Популярные бренды

Vaderstad RAPID RDA S Series, Инструкция по эксплуатации

Результаты поиска

Содержание RAPID RDA S Series

Отзывы:

Похожие инструкции для RAPID RDA S Series

Бренды по названию

Популярные бренды