Vaderstad RAPID RDA S Series, Инструкция по эксплуатации

Страница: 7 / 122

RDA 500-800 S
Ver.2 01.11.2002 7
INTRODUCTION
Väderstad Rapid A 500-800 S is a high-capacity cultivation drill. The Rapid drills can be
used under a large variety of conditions, from "direct drilling" to sowing straight after the
plough. This versatility is made possible by the drill's coulter system design and its unique
depth control system, amongst other features.
The machine can be fitted with different types of pre-implements to suit varying farmland
conditions.
IMPORTANT!
This instruction manual is based on experience and results obtained during development of
the Rapid series of drills. Hints and guidelines are to be regarded as general advice, entail-
ing no responsibility whatsoever on the part of Väderstad-Verken AB and/or its represent-
ative. All responsibility for usage, road transport, maintenance and repair etc. of the drill
rests with the owner/driver.
Local conditions affecting crop sequence, soil type, climate etc. may require procedures
different to those mentioned in this manual.
The owner/driver is solely responsible for using the drill correctly in every respect.
Väderstad drills are subjected to thorough quality assurance inspection and function test-
ing before delivery. The user/purchaser shall retain sole liability for ensuring that the
equipment is functioning correctly when in use. Väderstad-Verken AB shall not be liable
for any claims for indirect or consequential damages relating to losses incurred in connec-
tion with the use of the drill. Väderstad-Verken AB accepts no liability for losses arising
from incorrect use of the drill, including its depth control and seed dosage equipment.
Please refer to ”
4.1 Sowing depth” on page 68
and ”
4.2 Checking the seed feed” on page
69 in this manual.
DECLARATION OF EU CONFORMITY
in accordance with the EU machine directive 98/37/EEC, attachment 2 A
Väderstad-Verken AB, P. O. box 85, 590 21 Väderstad, SWEDEN
hereby declare that drills as below have been manufactured in conformity with Council
directive 98/37/EC and standard EN-1553.
RDA 500 S, RDA 600 S and RDA 800 S with manufacturing number 12 000 - 16 000.
Lars-Erik Axelsson