Vaderstad RAPID RDA S Series, Инструкция по эксплуатации

Страница: 29 / 122

RDA 500-800 S
Ver.2 01.11.2002 29
E
Unlock the wing sections using the operating cord from the tractor cab. Keep the cord taut until
the second section has begun to unfold.
F Unfold the drill while driving slowly forward. Keep holding the hydraulic lever until the fold-
ing ram is fully extended and the piston rod on the weight transfer ram has retracted to approx-
imately half its length.
G Always drive forward when the drill is being lowered to working mode for sowing, to prevent
the seed coulters becoming clogged.
H Undo the safety cotter pins of the bout markers (mftg. no. 12450-).
3.5.2 Changing from working to transport mode
A Turn off the Low lift function on the Control Box. Raise the drill to its topmost position. NO-
TE! Folding and unfolding must always be carried out with the central section fully raised.
B Fold the drill and check that the locking bars are fully engaged.
C Turn both valves quickly from position B to position A.
Warning:
Do not stand with your feet under the tool bar as the machine can drop slightly.
D Using the lifting system, draw the wheels on the wing sections in until they are just inside the
transport width of the seed coulters. If the wheels are drawn in any further than this, the hopper
may be damaged.
E Check that any additional implements on the drill are within the 3.0 m transport width.
F Block the bout markers with the safety cotter pins (mftg. no. 12450-).
Figure 3.12 Figure 3.13
Figure 3.14 Figure 3.15